Brashler, K.
Keith Brashler is a Pump Specialist in the Consulting Services Department for Saudi Aramco. He earned a BS degree in mechanical engineering from Washington State University. Brashler has 34 yr of rotating equipment experience in oil and gas, power generation, nuclear, and pulp and paper, with an emphasis on pump and system troubleshooting.
Hot oil pump warm-up system best practices and failure case study
Many industries utilize pumps in hot applications, including oil and gas facilities.
Vertically suspended molten sulfur pumping challenges and best practices
The objective of this article is to share industry experience related to the reliability challenges with vertically suspended molten sulfur pumps. Due to the operating temperatures and the unique chemical properties of sulfur, several operational and reliability challenges are inherently present across the industry.
Pump recycle line optimization and energy savings
The objective of this article is to demonstrate the benefits of optimizing the pumping system through pump recycle line evaluations.
Use infrared thermal imaging for pump system condition monitoring and early failure detection
Thermal imaging technology has evolved over the years, and investment costs have decreased significantly.
Resolving vibration problems in a crude booster pump
The pumps referred to in this article are 2,600-HP vertical pumps utilized as booster pumps for the shipment of crude oil.
High-energy pump balance line flow monitoring using ultrasonic flow measurements
The objective of this article is to demonstrate the value of utilizing portable or permanently mounted ultrasonic flow measurement technology to measure and monitor high-energy pump hydraulic balance line flow.
Preventing wire wooling journal bearing failure
This work details the operation of a 21,000-HP, five-stage barrel pump utilized for seawater injection service.
Troubleshooting the repetitive failure and shaft seizure of a hot oil circulation pump
The Shaybah NGL recovery plant has a single-stage, double-suction between bearings, radial-split design for hot oil circulation.
- 1
- ... 1 pages
- Perpetual Next appoints Bilfinger as lead consultant for its Methanol Moerdijk project 4/1
- ASRock Industrial and CSI Validate O-PAS™ Systems Management Architecture with the iEP-7020E and AiSMA 4/1
- Heavy equipment for KazMunayGas' Atyrau PE plant ships from Shanghai to Kazakhstan 4/1
- KT Tech awarded early engineering works contract for 60,000-tpy SAF plant in Indonesia 4/1
- OCI Global completes sale of OCI Ammonia Holding to AGROFERT 4/1
- Union workers ratify contract at ExxonMobil's Louisiana (U.S.) refining and chemical complex 4/1
