August 2012
Special Report: Fluid Flow and Rotating Equipment
Modernize your compressor lube- and seal-oil systems
Each pipe or control line should be traced to its origin, the design intent must be well understood, and all owner-purchaser questions answered by the vendor-manufacturer.
The Author
Heinz P. Bloch resides in Montgomery, Texas. He retired as Exxon Chemical’s Regional Machinery Specialist for the U.S. and has authored or co-written more than 780 publications, among them 23 comprehensive books on practical machinery management, failure analysis, failure avoidance, compressors, steam turbines, pumps, oil mist lubrication and optimized lubrication for industry. Mr. Bloch holds BS and MS degrees (cum laude) in mechanical engineering from the Newark College of Engineering (NCE). He is one of 10 inaugural inductees into NCE’s Hall of Fame, which honors its most distinguished alumni.
Related Articles
- Causes and countermeasures for a compressor lube oil system failure due to delayed oil pressure recovery by an auxiliary lube oil pump
- Application of systems engineering principles in a reliability assessment of air-cooled heat exchangers
- The implementation and automation of an alarm management system in a complex control environment at KNPC’s Mina Al-Ahmadi refinery
Comments