August 2022
Catalysts
Hydroprocessing catalyst reload and restart best practices—Part 2
Hydroprocessing (hydrotreating and hydrocracking) units are high-pressure, high-temperature units that have multiple reactors, multiple beds per reactor and specialized metallurgy. Catalysts in these units are replaced on a 2 yr–5 yr cycle, depending on feed quality, unit design, catalyst selection, operational constraints and performance.
The Authors
Shaun Dyke is an experienced chemical engineer who has worked in the refining and petrochemical industries for more than 40 yr in numerous technical, managerial, governance and consulting roles around the world. He lives in and works from New Zealand and writes in his spare time. Mr. Dyke earned a BSc degree (First Class Honors) in chemistry from Massey University, New Zealand. The author can be reached at shaun.dyke@petroquantum.co.nz.
Nattapong Pongboot is an experienced chemical engineer with hands-on knowledge in refining and petrochemical technologies as both licensor and refiner. He is currently a Project Manager under the Refinery Catalyst Testing group at Avantium Catalysis, delivering high-quality catalyst testing services for customers worldwide. He holds an M.Eng. degree in chemical engineering from Kasetsart University. The author can be reached at Nattapong.Pongboot@avantium.com or /Nat.Pongboot@gmail.com.
Related Articles
- New alternatives for severe service urea letdown valve applications
- Causes and countermeasures for a compressor lube oil system failure due to delayed oil pressure recovery by an auxiliary lube oil pump
- Application of systems engineering principles in a reliability assessment of air-cooled heat exchangers
Comments