Environment & Safety
Productivity in process plant engineering: Aspects and examples
For centuries, division of labor has been the recipe to improve productivity—dividing an organizational set of tasks into smaller tasksets, as assigned to individuals.
Impact of biofeed retrofits, co-processing on refinery amine units, SWSs and SRUs—Part 2
Producing diesel with a portion of biologically sourced carbon is being done at an increasing number of conventional crude oil refineries.
HP Flashback: Operations, processes and safety evolve and advance: Excerpts from the 1930s
The following is a mixture of technical articles, columns and headlines published in the 1930s by <i>The Refiner and Natural Gasoline Manufacturer</i>, the forerunner to <i>Hydrocarbon Processing</i>.
History of the HPI: The 1930s: Catalytic cracking, polyethylene, synthetic fibers, resins and jet engines
The hydrocarbon processing industry (HPI) has a rich history of discovery, challenges, breakthroughs, trial and error, collaboration and success. <i>Hydrocarbon Processing</i> continues its reflection on the history of the HPI.
Executive Viewpoint: What is the future for the HPI?
<i>Hydrocarbon Processing</i> sat down with Helion Sardina (HS), Chief Commercial Officer, Lummus Technology.
Web-based software for predicting crude compatibility and optimization for increasing heavy oil processing
Refineries in oil-importing nations typically process a blend of crude oils, rather than a single crude oil, to ensure that an optimum product mix can be obtained at the minimum costs.
Editorial Comment: Adoption of digital technologies is a mainstay in the HPI
A few years ago, <i>Hydrocarbon Processing</i> started to include digital technologies in its monthly article focus.
Are hot pipes and equipment surfaces ignition sources in the HPI?
Most international and national standards used in the hydrocarbon processing industry (HPI) for conducting hazardous area classification do not provide any guidance or recommendation for non-electrical equipment, such as hot pipe and equipment surfaces, that can act as ignition sources.
Executive Viewpoint: Decarbonizing ethylene production
<i>Hydrocarbon Processing (HP)</i> sat down with Stan Knez (SK), Chief Technology Officer, Technip Energies, to get his insights on decarbonization, digital and process technologies and sustainability within the processing industries.
Impact of biofeed retrofits, coprocessing on refinery amine units, SWSs and SRUs—Part 1
Diesel with a portion of biologically sourced carbon is being produced at an increasing number of conventional crude oil refineries.
- Petrobras delivers LPG sold at steep premiums despite Lula move to annul auction 4/3
- Plug Power to supply 275-MW GenEco electrolyzer system for Hy2gen’s Courant decarbonized ammonium nitrate project 4/3
- Vietnam refinery boosting jet fuel production 4/3
- China plans to upgrade some petrochemical plants, phase out others by 2029 4/3
- Morocco has diesel stocks for 51 days, energy ministry says 4/3
- Nigeria's Seplat Energy hit by strike amid push for higher output 4/3
