Environment & Safety Gas Processing/LNG Maintenance & Reliability Petrochemicals Process Control Process Optimization Project Management Refining

Crude oil

Impact of inaccurate water-in-oil measurement

TÜV SÜD National Engineering Laboratory: Yang, M.

Water-in-oil content is an important parameter for both the upstream and downstream sectors of the oil and gas industry.

Improve kerosene mercaptan sweetening with fluoropolymer-cartridge liquid-liquid coalescers

Pall Corp.: Wines, T. H.  |  Gorin, A.
Honeywell UOP: Rios, J.  |  Trucko, J.

Many refineries are experiencing new problems related to the formation of stable emulsions and poor separation due to the increased use of lower-cost opportunity crude oils that have a high total acid number (TAN), higher gravities and more sulfur content.

Asphaltene removal technology produces novel cement waterproofing additive

Well Resources Inc.: Chung, W.
National Chia-Yi University: Lee, M.-T.
Shin Chuang Technology Co. Ltd.: Chen, C.-Y.  |  Chen, F.-P.  |  Lin, T.-B.

Addressing climate change and environmental issues has become a top priority in the 21st century.

Implementation of advanced level control techniques in refinery operations

Nayara Energy Ltd.: Mandal, K. K.

Plant performance depends on stable operations, with steady feed, product flow, temperature and pressure control as per process requirements.

Management of LPG pool in a complex refinery

Tüpraş: Saka, A.  |  Kutman, D.

LPG pool management is becoming more important as the regulations on the product specifications tighten.

Oil refinery/petrochemical integration in a CO2-constrained world—Part 2

Fluor: Baars, F.  |  Oruganti, S.  |  Kalia, P.

Petrochemical demand will increase with gross domestic product, while the demand for motor fuels will only show modest growth and may even decline in certain regions, given environmental/legislative pressures and the introduction of battery-powered electric vehicles.

MAA refinery—Bunker fuel oil challenge: Stable and compatible VLSFO production

Kuwait National Petroleum Co.: Matar, M. B.  |  Al-Mane, A.  |  Rajendran, M.

Studies have been conducted on strategies for bunker fuel oil (BFO) production with reduced sulfur and catalytic fines concentration limits.

Online treatment of a slide valve fault in an FCCU

PetroChina Jinzhou Petrochemical Co.: Ruibo, G.
China University of Petroleum: Wei, P.  |  Yansheng, L.

The regeneration slide valve is a key piece of equipment that controls the ratio of catalyst to oil and reaction temperature in FCC units (FCCUs).

Industry Perspectives

Hydrocarbon Processing Staff: Nichols, Lee

Last month, <i>Hydrocarbon Processing</i> presented its mid-year market update to a global audience.

Industry Metrics

U.S. Gulf Coast margins increased, supported by unplanned refinery outages that limited a stronger recovery in run rates and kept product outputs relatively supressed.