Maintenance & Reliability
Scott Safety releases reusable single gas monitor, docking station
MONROE, N.C. -- Scott Safety introduced the Protégé SG, a reusable single gas monitor, and the MasterDock II, an expandable docking station.
US agency: Weak safety standards led to Exxon refinery blast
HOUSTON (Reuters) -- The US Chemical Safety Board (CSB) has concluded that a 2015 explosion at a Torrance, California, refinery then owned by Exxon Mobil Corp could have been prevented, the agency concluded in a report issued on Wednesday.
Equipment critical analysis: The need for an effective maintenance program
Oil refineries and large petrochemical plants contain thousands of pieces of process and utilities equipment that are subject to wear, erosion, deterioration, aging, etc., resulting in increasing breakdowns and outages. Imagine being a maintenance engineer and receiving 50 work orders during an overhaul with a limited budget, time, labor, spare parts, tools, machines, etc. How does that engineer prioritize the work?
Root cause analysis on bearing failure on an induced draft fan
This case study aims to provide the root cause analysis behind bearing failure of an induced (ID) fan at a new refinery startup in 2015.
Reliability: Understanding right-angle gear backlash
By definition, all gear units have teeth. These teeth are designed and produced to a certain strength, or a defined force-on-tooth, or an allowable pressure-load on tooth.
Business Trends: Human reliability—a disruptive innovation
Annual bottom-line losses due to equipment failures total more than $100 MM at major refineries and petrochemical complexes. Corporate executives charge plant personnel with improving the reliability of the facility.
Editorial Comment: Maintenance—a value-added expense
This issue of <i>Hydrocarbon Processing</i> tackles one of the most integral aspects of the downstream industry (or any industry, for that matter): maintenance and reliability. These two terms go hand-in-hand and help to ensure efficient and safe operations.
Recommended practices for fired process heater instrumentation and control
Fired process heaters are one of the most critical pieces of equipment within many refinery and petrochemical facilities. Proper instrumentation and control of the equipment has direct bearing on the successful operation of the process, as well as on overall facility process safety.
A deeper examination of thermal expansion issues in process equipment and piping
Piping and process equipment that operate at high temperatures experience thermal expansion. If free thermal expansion is restrained, mechanical stresses are created within the component.
Continuous corrosion monitoring of crude overhead systems
The growing availability of light tight oils (LTOs) is resulting in a choice for refiners between upgrading metallurgy or chemical inhibition and corrosion monitoring to manage the increased corrosion risk. With tight budgetary constraints in place, many oil companies are opting for chemical inhibition and online corrosion monitoring.
- Petrobras delivers LPG sold at steep premiums despite Lula move to annul auction 4/3
- Plug Power to supply 275-MW GenEco electrolyzer system for Hy2gen’s Courant decarbonized ammonium nitrate project 4/3
- Vietnam refinery boosting jet fuel production 4/3
- China plans to upgrade some petrochemical plants, phase out others by 2029 4/3
- Morocco has diesel stocks for 51 days, energy ministry says 4/3
- Nigeria's Seplat Energy hit by strike amid push for higher output 4/3
