Process Optimization
Apply a short-term, high-temperature carbon steel solution to piping systems
Carbon steel (CS) piping and equipment are used extensively in refineries and petrochemical plants, where fluid temperatures vary from moderate to high for various processes.
Use computational fluid dynamic analysis to revamp fired heaters
A refinery process fired heater system consists of multiple sub-units, of which the fired heater is the most critical, as it impacts the overall efficiency of the system.
Small-scale coal-to-chemicals can revitalize India’s petrochemicals industry, economy—Part 2
In Part 1 of this article, published in April, the barriers of petrochemical production in India were discussed, along with the opportunity to explore chemicals from coal, using the specific example of polyvinyl chloride (PVC).
Catalytic coprocessing of used cooking oil with straight-run gasoil in a hydrotreating pilot plant
A promising route to obtain bio-gasoil (bioGO) or hydrotreated vegetable oil (HVO) is the catalytic coprocessing of vegetable oil with diesel oil in a conventional hydrotreating unit.
Amec Foster Wheeler wins FEED to modernize major SOCAR refinery
The contract, awarded by the State Oil Company of Azerbaijan (SOCAR), is part of a major investment to increase the refinery’s capacity and improve the quality of the fuel produced.
Strategic assessment of the Iranian petrochemical industry
The recent agreement between Iran and the international community represents clear opportunities and challenges for petrochemical producers.
Calculate thermal growth of a fractionation tower for piping engineering
The fractionation tower/column is common processing equipment in the petroleum refinery and chemical industry.
In-depth and preemptive front-end planning yields positive project results
Despite the challenges that major projects can present (short deadlines, budget constraints and overruns, unforeseen problems onsite and tension throughout executive teams), they can also prove to be a win-win for both the owner and the engineering, procurement and construction (EPC) firm.
Design a pressure safety valve at the centrifugal pump discharge
In most process plants, it is unusual to install a pressure safety valve (PSV) to centrifugal pump and compressor discharge, but some PSVs are needed and are installed to protect the system against miscellaneous scenarios that could create overpressure in the system.
Engineering Practices: How a full-service R&D laboratory can help your company
To survive and stay competitive in the rapidly changing, technology-driven hydrocarbon processing and petrochemical fields, companies must stay ahead of their research and development (R&D) needs.
- Topsoe and Sasol bring advanced SAF technology to Allied Biofuel’s landmark project in Uzbekistan 7/14
- OMV receives €450-MM loan from the European Investment Bank for its 140-MW green hydrogen production facility 7/13
- Poland's Unimot says it will supply crude to Germany's Schwedt refinery 7/13
- Hormuz traffic slows to two-month low as renewed U.S., Iran strikes raise safety risk 7/13
- Sinopec deepens aviation fuel push with CNAF restructuring 7/13
- Indian naphtha premiums surge as Gulf, Russian supply tightens 7/13
