Loss Prevention
HP Refining: Maintain plant production with temporary heat exchangers
Of all the process operations in a refinery or petrochemical plant, heating and cooling streams are perhaps the most pervasive.
HP Innovations
Ingersoll Rand debuted its TURBO-AIR NX 8000 integrally geared centrifugal compressor at the Turbomachinery & Pump Symposia show in Houston, Texas in September.
Design pressure reduction in high-pressure heat exchangers with dynamic simulation
A commercial simulation tool is used to carry out the analysis of the transient phenomena caused by the tube rupture event during the design phase of an HP heat exchanger.
Managing the recovery from the Jaipur oil terminal fire
In October 2009, a devastating fire at the oil terminal in Jaipur, India, killed 11 people, injured many more and incurred a significant financial loss.
Improve refinery flexibility and responsiveness
The hydrocarbon processing industry (HPI) has changed significantly with an abundance of available discounted crude oils, a rise in markets served beyond the traditional local or regional demands, and a renewed focus on being both competitive and profitable while complying with ever-changing regulations.
Proposed US water definition may alter future of HPI
The US Environmental Protection Agency (EPA) and the US Army Corps of Engineers (USACE) proposed Rule 33 CFR Part 328, a regulation intended to redefine and clarify the reach of the EPA’s jurisdi..
HP Automation Safety: Conducting audits to confirm safety standard compliance
The ISA 84 (IEC 61511) standard on safety instrumented systems (SISs) in the process industries states that assessments and audits are required to determine that functional safety has been achieved and maintained.
Consider Zone 0 vertical pumps for slop pits
Over the past several decades, a leading overseas HPI corporation experienced a disturbing number of explosions in its belowground hydrocarbon sump pits.
HP Viewpoint: Must devices be certified for use in safety instrumented systems?
For decades, process industries have used different forms of safety control based on what was available in the market. The simple answer to the question of whether SIS devices need to be certified is, "No," but operators and the industry as a whole continue to ask for certification anyway. Why is this?
European refiner revamps delayed coker to meet Euro 5 specifications
This case study chronicles how the European refiner Rompetrol Rafinare SA upgraded its Petromidia refinery in Navodari, Romania, includingthe revamping the delayed coker unit (DCU) to address existing operating problems.
- Vioneo awards Lummus polypropylene contract for world's first industrial scale fossil-free plastics from green methanol facility 8/19
- Research: Developing an energy-saving, carbon-capturing method for making ethylene glycol 8/19
- Emerson announced the release of its new Rosemount 3144S temperature transmitter 8/19
- Chinese refiners sweep up Russian oil after Indian demand falls 8/19
- Indonesia plans quick-to-build oil refineries for U.S. crude 8/19
- Russia's ultra low-sulfur diesel exports from Primorsk scheduled to rise in August 8/19
