Refining
Reliability: Finding upgraded sealing solutions
By universal agreement, the safety and reliability of facilities in the hydrocarbon processing industry—and most other industrial plants—are of highest importance.
Down with downtime: Repair complex petrochemical components with selective electroplating
The volatile impact of the coronavirus pandemic hit at the same time the petrochemical industry was entering a downcycle.
Strategies to minimize piping thermal maintenance system cost without compromising performance
Where process fluid must be maintained within a certain operating temperature window, the piping will likely require the application of a thermal maintenance system.
Optimizing failure data analysis
A critical objective of engineers who design an automatic protection system is to lower the false trip rate and to lower a key metric called average probability of failure on demand (PFDavg).
The use of tube inserts in fired heaters
In 1896, Whitham<sup>1</sup> reported the successful use of twisted tapes (originally called retarders, and now also called turbulators) to increase heat transfer in boiler fire tubes—their effectiveness in increasing heat transfer is well known.
Getting the most out of your process burner tiles
It is often incorrectly assumed that the burner tile is simply a piece of refractory or firebrick. Nothing could be further from the truth.
Specifying internals in sour water strippers—Part 2
Sour water stripping is a common process in petroleum refineries and other processes where hydrogen sulfide (H<sub>2</sub>S) is present.
Best practices for pygas-based styrene extraction
Pyrolysis gasoline (pygas) is a by-produced fraction of hydrocarbons generated from a steam cracker.
Fuels and chemicals: Finding the right refinery configuration for a less predictable world
The refining industry links the upstream production of crude oil with the end markets for fuel products, as well as for the petrochemical/chemical industry.
Specifying internals in sour water strippers—Part 1
A sour water stripper (SWS) system is a common process in petroleum refineries and other processes where hydrogen sulfide is present.
- thyssenkrupp Uhde completes pre-FEED for HAMR Energy’s renewable fuels project in Australia 8/21
- Berlin weighs trusteeship extension for Rosneft's German assets 8/21
- Trump administration to rule on biofuel exemption requests, delay reallocation decision 8/21
- TotalEnergies' Donges refinery fire extinguished 8/21
- CMB.TECH completes merger with Golden Ocean 8/21
- Ketjen introduces new breakthrough catalyst that mitigates the effects of iron poisoning in FCCUs 8/20
