Engineering & Design
Stability analysis of debutanizer columns with hot-vap or bypass pressure control
A debutanizer column was experiencing unstable operation, with frequent pressure swings and product composition fluctuations from the column overheads system.
High-pressure water pump mechanical seal failure investigation
To mitigate leakage, mechanical seals are one of the most critical components for centrifugal pumps.
Improving certainty in uncertain times by building an IIoT-ready plant
Historical statistics indicate that 25% of projects have budget overruns and a further 50% have schedule slippage.
How APM in LNG operations can lower TCO and boost ROI
As the world’s hydrocarbon appetite continues its rapid turn toward lighter fare (e.g., natural gas for power generation, transportation and industry), massive, near-term investments in global, capital-intensive, fully digitalized LNG infrastructure are needed.
Liquefaction technology selection for baseload LNG plants
As global liquefied natural gas (LNG) trade continues to rapidly expand, the challenge of liquefaction process selection—a key element of an LNG project—becomes increasingly important.
What are the financial savings from a refinery cybersecurity program?
Recently, the authors developed a first-pass financial estimate of the savings resulting from the implementation of a cybersecurity program for a 100-Mbpd refinery.
Digital: Looking to boost safety? Reliable operations are the key
Equipment failures are the thorn in every industrial plant’s side.
Engineering Case Histories: Case 101: Preventing crankshaft failures in large reciprocating engines
The gas processing and pipeline industries use many integral gas engine reciprocating compressors with crankshafts more than 20 ft long.
Editorial Comment: What is the future role of the process engineer?
During the American Institute of Chemical Engineers’ (AIChE’s) Spring Meeting, held in Orlando, Florida in April, I was honored to sit on a panel discussion with Paul Durand from ExxonMobil and Sanjeev Kapur from Apex PetroConsultants.
Creating a ‘win-win’ between construction contractor and project owner—Part 2
For large projects, construction represents the biggest cost component and the greatest risk.
- SkyNRG starts construction on its first SAF plant in Delfzijl, the Netherlands 2/13
- India's Reliance wins U.S. license for Venezuelan oil 2/13
- Singapore light distillates stocks hit over 3-yr high on robust imports 2/13
- Three contractors injured at ExxonMobil facility in Beaumont, Texas (U.S.) 2/13
- China's epic renewables boom lifts it into rare clean capacity club 2/13
- TotalEnergies booked loss in France due to refining activities, CEO says 2/13
