Process Optimization
Business Trends: How plastics waste recycling could transform the chemical industry
If plastics demand follows its current trajectory, global plastics-waste volumes would grow from 260 MMtpy in 2016 to 460 MMtpy by 2030, taking what is already a serious environmental problem to a new level.
Selection of cooling water system for gas, petroleum and petrochemical plants located on coastline - Part 1
Cooling water systems play an important role in today’s industry.
Improve CCR reforming profitability using a novel high-density catalyst
Catalytic reforming has been a staple in petroleum refining since 1949.
Solve gravity separation challenges
Separation of oil, water, gas and solids (sand) droplets/particles is one of the most common requirements in most oil and gas facilities.
Develop reactor internals for optimizing reactor design - Part 2: High-performance mixing chamber
Most hydroprocessing reactors are fixed-bed reactors comprising several catalyst beds that are divided by quench zones containing mixing chambers that introduce a vapor-quenching medium.
Coke drum and blowdown system overpressure protection design - Part 1
The blowdown (BD) system in delayed coking units (DCUs) receives waste streams generated during the coke drum (CD) decoking process to recover valuable hydrocarbons and water. In recent DCU designs, the CD pressure relief valves (PRVs) also discharge to this system and then to the flare system via the BD PRVs.
FCC operational changes to boost gasoline octane
The fluid catalytic cracking unit (FCCU) is one of the main units providing gasoline with high-octane numbers to the refinery gasoline pool.
Ultra-deep desulfurization of FCC gasoline: Reactive adsorption strategy
With an increase in concern for the environment, countries around the world are implementing stringent environmental regulations and are continuously pressuring refiners to reduce the amount of sulfur in transportation fuels—primarily gasoline and diesel—to combat airborne pollution caused by vehicles.
Digital: Digitalization—Why now?
The process industries are under threat.
Fabrication of clad equipment and piping—Part 2
For pressure vessels, heat exchangers and piping in corrosive services, the materials in contact with the process are often required to be high alloys to provide a reliable service life.
- UPM unlocks new bio-based markets as Leuna biorefinery produces its first commercial product 12/19
- Stamicarbon awarded technology licensing contract for new urea plant in Eastern China 12/19
- Ford takes $19.5-B writedown on EV business 12/19
- Babcock & Wilcox awarded $40-MM contract for advanced wet gas scrubbing technology at Canadian petroleum refinery 12/19
- Aarti Industries secures methanol and toluene feedstock supply through multiple long-term contracts 12/19
- bp picks first outsider CEO Meg O'Neill after abrupt Auchincloss exit 12/19
