Refining
The heavy toll on sulfur blocks
The tightening of environmental norms and emissions specifications provides additional challenges to refining.
Hot oil pump warm-up system best practices and failure case study
Many industries utilize pumps in hot applications, including oil and gas facilities.
Essar oil UK to build £360 MM carbon capture facility
Essar Oil UK Limited announced its plan to build a £360 MM major new carbon capture plant at its Stanlow refinery in line with its ambition to become a leading low carbon refinery by 2030.
AFPM responds to U.S. EPA's new RFS proposal
Following the release of the U.S. Environmental Protection Agency's earlier announcement about the Renewable Fuel Standard (RFS) on blending obligations, the AFPM has released the following statement.
Cut emissions and fuel while increasing capacity in fired heaters
According to a recent digital refining article,1 fired heaters are responsible for an estimated 400 MMtpy–500 MMtpy of CO<sub>2</sub>, with at least 73% of average refinery CO<sub>2</sub> emissions coming from combustion.
U.S. EPA proposes higher biofuel blending volumes, EV program
The U.S. Environmental Protection Agency proposed increases in the amount of ethanol and other biofuels oil refiners must blend into their fuel over the next three years.
A novel deep catalytic cracking technology for residue-to-chemicals processes
Over the past two decades, annual global demands for refined products and basic petrochemicals have increased by approximately 1.3% and 3.5%, respectively.
More ethanol was blended into U.S. gasoline last summer than ever before
Last summer, when the price of fuel ethanol was lower than the petroleum component of gasoline, record amounts of ethanol were blended into the gasoline sold in the United States (blend rates).
Development/industrial application of FCC catalyst for boosting high-octane gasoline production
Globally, crude oil is trending toward being heavier; the proportion of heavy crude oil reserve is expected to be 50% of the entire recoverable oil reserve moving forward from 2020.
Flexibility in catalyst technology for improved bottoms upgrading
Bottoms product from fluidized catalytic cracking (FCC) is typically one of the least valuable products from a refinery.
- UPM unlocks new bio-based markets as Leuna biorefinery produces its first commercial product 12/19
- Stamicarbon awarded technology licensing contract for new urea plant in Eastern China 12/19
- Ford takes $19.5-B writedown on EV business 12/19
- Babcock & Wilcox awarded $40-MM contract for advanced wet gas scrubbing technology at Canadian petroleum refinery 12/19
- Aarti Industries secures methanol and toluene feedstock supply through multiple long-term contracts 12/19
- bp picks first outsider CEO Meg O'Neill after abrupt Auchincloss exit 12/19
